(more pro AI/design workflows: [BRAND NAME = airbnb] [BACKGROUND COLOR = pink] [MODEL CO…

(more pro AI/design workflows: [BRAND NAME = airbnb] [BACKGROUND COLOR = pink] [MODEL COLOR = pink] Create a 16:9 path-traced studio CGI image of the authentic official standalone symbol of [BRAND NAME], transformed into a single-piece solid-glass icon. CORE OBJECTIVE Create one seamless rounded-square glass object containing an optically dense internal field controlled by [MODEL COLOR], one oversized brand symbol inside the glass volume, and one perfectly continuous polished outer surface. The result must feel like a photographed glass art object, not an app icon, UI asset, material test or conventional 3D logo mockup. Build the visual drama through light, color, transmission and optical density inside one homogeneous glass volume. Do not construct separate layers or components. COLOR SYSTEM Use [BACKGROUND COLOR] only for the external seamless studio background. Use [MODEL COLOR] as the dominant hue of the glass body, expressed through darker absorption zones, clearer transmitted midtones, brighter illuminated regions and deeper color accumulation near thick curved edges. Do not replace [MODEL COLOR] with a variation of [BACKGROUND COLOR]. Derive the internal logo color automatically as a pale, softly luminous companion tone that harmonizes with both variables. It must remain clearly lighter than [MODEL COLOR], share its hue family, remain compatible with [BACKGROUND COLOR] and feel like a lighter optical state of the same material. For neutral backgrounds, derive it mainly from a pale desaturated version of [MODEL COLOR]. For chromatic backgrounds, allow a restrained influence from [BACKGROUND COLOR]. Keep background, body and logo clearly separated in brightness and saturation. BRAND ACCURACY Use the most recognizable authentic official standalone symbol of [BRAND NAME]. Preserve its exact silhouette, canonical proportions, negative spaces, curves, terminals, intersections and spacing. Do not redesign, simplify, mirror, distort or replace the mark. Use the wordmark only when no official standalone symbol exists. Ignore native colors while preserving authentic geometry. SINGLE-PIECE CONSTRUCTION The object must read as one continuous mass of tinted glass: no outer frame, shell, front panel, insert, seam, border, bonded material or physical division between logo and body. The logo must exist only through internal color, translucency and optical-density variation inside the same glass volume. It must not affect the external surface height, curvature or roughness. Reflections must travel continuously across the body and logo without interruption, contour distortion or displacement. CONTAINER GEOMETRY Create a compact square glass tile with equal width and height, corner radius around 11–14% of its width, moderate thickness, restrained front convexity and continuous side walls. The front should be almost planar with only a subtle optical bulge. Keep the silhouette closer to a softened square than a pill-shaped app icon. Do not create an inflated, gel-like or heavily domed object; no raised perimeter, inner face, secondary rim, flange, double contour or separate bevel. The outer silhouette must be one continuous glass radius. From the near-frontal camera, reveal only minimal side thickness. GLASS MATERIAL Render physically thick, optically dense polished tinted glass: cool, hard, heavy, internally transparent, colored through absorption, perfectly smooth and free from plastic softness. Use clean refraction, controlled transmission, depth-dependent absorption, subtle internal reflection, mild edge darkening, restrained dispersion and optical compression near curved edges. The background must not remain clearly visible through the object. Avoid clear glass around an opaque core, resin, acrylic, lacquer, glossy plastic and clearcoat behavior. MODEL COLOR FIELD Fill most of the glass with [MODEL COLOR] as a true material hue, not a flat graphic fill. Create the darkest absorbed version toward the left and lower-left, denser accumulation near thick edges, clearer midtones through the center and slightly greater transmission near the upper-right. Keep gradients smooth and low-frequency. Preserve vivid hues while controlling saturation through thickness and absorption; preserve the temperature of neutral colors. Allow near-black zones only when compatible with [MODEL COLOR]. Do not illuminate the whole volume equally. INTERNAL LOGO Place the authentic symbol inside the glass as a pale, milky, softly translucent internal color field. It must be substantially lighter than the body yet affected by the absorption and transmission of [MODEL COLOR]. Keep it below pure white unless stronger contrast is necessary. The logo must not appear printed, engraved, etched, carved, inset, embossed, raised, recessed, laminated, floating, bevelled, outlined or separated by a seam. Its perimeter must remain graphically precise, but the transition must occur only through internal hue, density and transmission. Do not add contour shadows, local ambient occlusion or surface deformation around it. LOGO CROP Uniformly enlarge the official symbol without changing its proportions. Do not present it fully visible with comfortable margins. Allow approximately 15–30% of the geometry to extend outside the visible internal field. Crop on multiple sides when appropriate; horizontally structured symbols should usually crop on both left and right, while vertical symbols may crop at top or bottom. Preserve the most recognizable geometry, create broad abstract light and dark regions, remove conventional safe-area spacing and distribute visual mass across the container. The crop must feel intentional, not accidental. Never convert the mark into an invented monogram. INTERNAL LIGHT TRANSPORT The logo must not have uniform brightness. On the left, reduce transmission, deepen the absorbed [MODEL COLOR], darken the pale logo and shift it toward a muted companion tone through gradual volumetric attenuation. Recover moderate luminosity toward the center. Toward the right and upper-right, allow slightly cleaner transmission and subtly brighter logo regions without turning them pure white. Shading must follow the complete glass volume, never the logo outline. The logo must not appear independently illuminated. OPTICAL CLEANLINESS The glass must be optically pure and internally homogeneous. Create depth only through smooth refraction, transmission and absorption gradients. No surface grain, rough micro-texture, orange peel, frost, speckling, procedural noise, bubbles, particles, haze, dust, cloudy density, mottling, dithering or denoising artifacts. Keep the surface perfectly polished and texture-free. The body and logo must contain clean, continuous, banding-free gradients. Any photographic grain may affect only the background and must never cross the glass, logo or reflections. Keep transmitted highlights below clipping. LIGHTING Use restrained asymmetrical photographic lighting that reveals selected parts of the object rather than evenly explaining it. Allow sections of the perimeter and interior to fall into deep optical shadow. Avoid balanced three-point lighting and full edge separation. Use one distant elongated diffused reflection card above and slightly left of camera. It should create a restrained narrow upper reflection, subtle front-curvature information and gentle light penetration, without a broad white top bar or dominant illuminated cap. The reflection should vary in strength and may partially disappear. Place one narrow vertical card to the right and slightly behind the object, creating only a short upper-right highlight, a partial right-edge reflection and slightly clearer transmission in that region. Do not illuminate the full edge or create a glowing perimeter. Place a large black negative-fill card to the left, deepening the left edge and interior, darkening the logo there and increasing absorption. Keep the transition broad and gradual, never a hard